This companion flange can be used to build a rear CV shaft off the NP203 or NP205 transfer cases. This flange will mate to a 1310, 1330, 1350, and 1410 flanges and CVJ heads with 2 inch pilot. Mating part numbers: 3502-21, 211631X, 211229X, 3594-2000U, etc. **holes may have to be drilled depending on mating component** Threaded: M12-1.75, see N800594-S100 bolt Seals for 2.125" ID, 3.063" OD: TK50092, 473468, 473204, etc.
Cross References:
3301201, 3-1-1351-2125, F81Z7B214BA
Cross References:
3301201, 3-1-1351-2125, F81Z7B214BA
- Mfr Part Number:
- 3301-201
- Pilot Dia:
- 2.000
- Bolt Cir Dia:
- 3.5, 4.25
- Class:
- LD
- Spline Ct:
- 32
- Spline Dia:
- 1.401
- Hub Dia:
- 2.125
- Thru Hole:
- 2.000
- Bolt Holes:
- 8
- Face to End:
- 2.125
