Spicer 10016266 Jeep JK Wrangler 1310 Front or Rear Transfer Case Output CV Yoke
10016921, 3104-321CV -- 10016266 IS A BOLT ON, FRONT TRANSFER CASE OUTPUT YOKE USED ON LIFTED 2007-2015 JEEP WRANGLER JK APPLICATIONS. REQUIRES A CUSTOM/AFTERMARKET FRONT DRIVESHAFT WITH A 1310 DOUBLE CARDAN STYLE CV ASSEMBLY.
PLEASE USE THE DANA ONILNE END YOKE CATALOG TO SELECT YOUR PART NUMBERS
10016266
JOINT SERIES:1310
D DIMENSION:1.401
E DIMENSION:
YOKE STYLE:CV
Q LENGTH THRU HOLE:2
R HUB DIAMETER:1.943
S CENTERLINE TO END:3.875
SPLINE COUNT:32 I
SPLINE OD:1.4
NOTES:This 1310 CV end yoke replaces the front or rear transfer case output flanges in the 2007+ Jeep JK. It allows you to build a 1310 Spicer style CV at the transfer case instead of the factory GKN style. This part can be combined with the 3102-392 flange at the front or rear differential to build a new Spicer 1310 shaft. This flange fits directly into the factory GKN differential companion flanges.
10016921, 3104-321CV -- 10016266 IS A BOLT ON, FRONT TRANSFER CASE OUTPUT YOKE USED ON LIFTED 2007-2015 JEEP WRANGLER JK APPLICATIONS. REQUIRES A CUSTOM/AFTERMARKET FRONT DRIVESHAFT WITH A 1310 DOUBLE CARDAN STYLE CV ASSEMBLY.
PLEASE USE THE DANA ONILNE END YOKE CATALOG TO SELECT YOUR PART NUMBERS
10016266
JOINT SERIES:1310
D DIMENSION:1.401
E DIMENSION:
YOKE STYLE:CV
Q LENGTH THRU HOLE:2
R HUB DIAMETER:1.943
S CENTERLINE TO END:3.875
SPLINE COUNT:32 I
SPLINE OD:1.4
NOTES:This 1310 CV end yoke replaces the front or rear transfer case output flanges in the 2007+ Jeep JK. It allows you to build a 1310 Spicer style CV at the transfer case instead of the factory GKN style. This part can be combined with the 3102-392 flange at the front or rear differential to build a new Spicer 1310 shaft. This flange fits directly into the factory GKN differential companion flanges.
